Free Powerpoint Presentations

Sound
Page
3

DOWNLOAD

WATCH ALL SLIDES

fridge refrigerator repair

F = tension in rope µ = mass per unit length of rope

In a rope, waves travel faster when the rope is under more tension and slower if the rope is denser. The speed of a sound wave is given by:

Rope:

Sound:

B = bulk modulus of medium  = mass per unit volume (density)

The bulk modulus, B, of a medium basically tells you how hard it is to compress it, just as the tension in a rope tells you how hard it is stretch it or displace a piece of it. (continued)

Slide 10

Speed of Sound (cont.)

Speed of Sound (cont.)

Rope:

Sound:

Notice that each equation is in the form

The bulk modulus for air is tiny compared to that of water, since air is easily compressed and water nearly incompressible. So, even though water is much denser than air, water is so much harder to compress that sound travels over 4 times faster in water.

Steel is almost 8 times denser than water, but it’s over 70 times harder to compress. Consequently, sound waves propagate through steel about 3 times faster than in water, since (70 / 8) 0.5  3.

Slide 11

Mach Numbers

Mach Numbers

Depending on temp, sound travels around 750 mph, which would be Mach 1. Twice this speed would be Mach 2, which is about the max speed for the F-22 Raptor.

Speed Racer drives a car called “The Mach 5,” which would imply it can go 5 times the speed of sound.

Slide 12

Temperature & the Speed of Sound

Temperature & the Speed of Sound

The speed of sound in dry air is given by: v  331.4 + 0.60 T, where T is air temp in°C.

Because the speed of sound is inversely proportional to the medium’s density, the less dense the medium, the faster sound travels. The hotter a substance is,

the faster its molecules/atoms vibrate and the more room they take up. This lowers the substance’s density, which is significant in a gas. So, in the summer, sound travels slightly faster outside than it does in the winter. To visualize this keep in mind that molecules must bump into each other in order to transmit a longitudinal wave. When molecules move quickly, they need less time to bump into their neighbors.

Here are speeds for sound:

Air, 0 °C: 331 m/s Air, 20 °C: 343 m/s Water, 25 °C: 1493 m/s Iron: 5130 m/s Glass (Pyrex): 5640 m/s Diamond: 12 000 m/s

Slide 13

Wavefronts

Wavefronts

Some waves are one dimensional, like vibrations in a guitar string or sound waves traveling along a metal rod. Some waves are two dimensional, such as surface water waves or seismic waves traveling along the surface of the Earth. Some waves are 3-D, such as sound traveling in all directions from a bell, or light doing the same from a flashlight. To visualize 2-D and 3-D waves, we often draw wavefronts. The red wavefronts below could represent the crest of water waves on a pond moving outward after a rock was dropped in the middle. They could also be used to represent high pressure zonesin sound waves. The wavefronts for 3-D sound waves would be spherical, but concentric circles are often used to simplify the picture. If the wavefronts are evenly spaced, then  is a constant.

Go to page:
 1  2  3  4  5  6  7  8  9  10  11  12  13 

© 2010-2024 powerpoint presentations